Copy

NEW Steel Rule Die Bits Available!


Spiral Contour Cutters
2 flute, 1/8" dia. contour end-mill

Cut 5/16" Freeman Premium Birch Dieboard as well as Ejection Rubber at high speeds for increased machine utilization! High flute volume, cutting edge geometry, and enhanced rigidity make these bits perfect for very high chip loads (150-175 in./min. @ 40 KRPM).


Chamfering / Cutout Tools 
2 flute, 1/8" (3.18 mm) shank, spiral "V" point 

Cut Black Maxx Counterplate at 100-120 in./min. @ 40 KRPM with an innovative design that virtually eliminates top edge lifting and fraying. These bits are optimized for the chamfering and through-cutting of glass-phenolic and paper-phenolic counter board substrates.




Contour Cutters / Alignment Pin drills 
3 flute up-cut  

Mill and drill with the same bit that minimizes splintering and fuzzing of the top or bottom surface at high feed rates and chip loads!




Skiving Tools
4 flute, 3/8" (9.53 mm) shank

This innovative split-flute, end cutting geometry is specifically tuned to cut composite and laminated counterboard substrates at a fraction of the noise! Try it with Black Maxx Counterplate!

See All Specifications & Details!
Copyright © 2018 Freeman Mfg & Supply Co., All rights reserved.


Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list