Repair Your Wax Pattern In 4 Easy Steps!

What You'll Need:

Matt Ring Mandrel
Matt Speedy Wax Pen
Transparent tape

Leftover Carving Wax scraps

1. Mark the mandrel at appropriate ring size. Place the transparent tape on the mandrel with the sticky side facing out.
2. Place broken piece(s) of the wax ring pattern on the tape/mandrel. This will help hold the broken wax in place while repairing.
3. Use the Matt Speedy Wax Pen to tack the broken pieces in place and join, creating a superficial bond.
4. Use the pen to pick up scrap wax of the same formula as your pattern and add/build-up at the joints. For a strong bond, penetrate the wax as far as possible with the tip of the pen.
Note: When building up, be sure to add a little extra wax to the surface so that you leave yourself room for filing and finishing.
5. When the outside is thoroughly joined, remove the pattern from the mandrel and repeat the process on the inside and sides of the pattern. Apply extra wax to the inside and sides as well.

Once the wax cools, it is ready for filing and finishing!
Find Your Local Distributor
– Freeman Manufacturing & Supply Company - Specialty Wax Division
Where to Buy
Copyright © 2017 Freeman Mfg & Supply Co., All rights reserved.

Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list