Copy

Porter's Pointer

Try a Sleek UV Coated Bottom Stripping Tool

The stripping section of a Bobst Press can be a bottleneck at times.  Many of our customers have found that the "slick" finish of a UV Coated Bottom Stripping Board helps with the sheet transportation through that section.
 
If you have not tried a UV Coated Board for your bottom tool, it may be worth a go. Freeman’s UV Coated Birch is coated in NC USA to the highest quality standards.

After calibrate sanding, a reverse fill polymer is driven deep into the pores of the dieboard and cured with a bank of UV lights.  

The panel is then precision sanded, prior to the application of a meticulous top coat and final UV cure. The result is a two-layer hard smooth finish.

This finish creates a very sleek surface for your bottom stripping die. It also provides a barrier that mitigates the hygroscopic moisture migration out of the plywood which is a major cause of warp.

Freeman’s UV is available on all Birch, Maple, and Ash Dieboards.


For all your die making needs visit our Interactive Website.

Mike Porter

Business Development Manager
Freeman Manufacturing & Supply Company
mporter@freemansupply.com
(440) 934-1902
• (847) 287-8587 (Cell)
Copyright © 2017 Freeman Mfg & Supply Co., All rights reserved.


Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list